Full Description
View Full Description
Suitable For Any Event
Purchasing a PA system can be daunting for users who don’t specialise in live events. With so many brands and options it’s hard to know which system will suit your needs.
For example, one sub is ideal when power isn’t desirable for small/intimate shows. The ability to mount the speaker columns either on top or to the side of the woofer also allows you to dictate the exact dispersion rate of high frequency content to reach its intended audience.
Two XLR inputs on the rear of the master woofer grant the ability to receive signal from an external PA system or connect up to two dynamic microphones or line-level sources. The through outputs can also be used to send signal from the column to an external PA system if necessary for bigger events.
Instant Great Sounds
Achieve great sounds with minimal effort via the M1’s digital signal processing. The onboard DSP proves useful as it allows you to quickly cycle through three of our pre-defined presets created by our team of in-house specialists. These presets apply global equalisation to any sound running through the Column PA System.
Monitor: Monitor is the most natural of the three presets and should be used when a clear, unfiltered sound is desired. This proves useful when equalisation is being applied from an external mixer.
DJ: DJ ensures an articulate low-end response thanks to its steep 40Hz filter enhance with a gradual boost at 60Hz. The surgical scoop around 750Hz is ideal for combatting “nasal” midrange, whilst the dip at 1kHz tackles harshness. This is complimented by the gentle top-end shelf which starts at 5kHz and peaks around 13kHz.
Live: This preset is useful for live bands and solo performers in small to medium sized indoor/outdoor venues. The gentle high and low pass filters around 30Hz and 12kHz deal with extreme highs and lows to prevent you from sounding harsh and muddy, without affecting any low-mid to high-mid frequency content.
Specifications
Active Master Subwoofer
- Type: 10” Active Bass Reflex
- Frequency Response: 47Hz-200Hz
- Max. SPL: 117dB
- Power Output (RMS) : 400W
- Impedance: 4 Ohms
- Transducer LF: 10” Subwoofer, 2” Voice Coil
- Amplifier: Class-D Amplifier
- DSP Module: 24-Bit / 96khz DSP Processor with Monitor, DJ, Live Preset Modes
- Protection: Short Circuit Overheating, Overcurrent
- Indicators: Power, Signal, Limit, Bluetooth, Reset
- Dimensions: 550mm x 360mm x 480mm
- Weight: 19kg
Active Slave Subwoofer
- Type: 10” Active Bass Reflex
- Frequency Response: 47Hz-200Hz
- Max. SPL: 117dB
- Power Output (RMS): 400W
- Impedance: 4 Ohms
- Transducer LF: 10” Subwoofer, 2” Voice Coil
- Amplifier: Class-D Amplifier
- Protection: Short Circuit Overheating, Overcurrent
- Indicators: Power, Signal, Limit
- Dimensions: 550mm x 360mm x 480mm
- Weight: 18kg
Column Speaker
- Type: Active Full Range Column Speaker
- Frequency Response: 200 Hz- 21KHz
- Max SPL : 109dB
- Power Output (RMS) : 30W
- Transducer MF: 4 X 2.75” Neodymium Magnet, 1” Voice Coil
- Amplifier: Class-D
- Enclosure: Plastic
- Grille: 1.0mm Thickness Metal Grille Without Acoustic Fabric
- Dimensions: 85mm x 112mm x 515mm
- Weight: 1.45kg
The latest in music technology, for modern musicians and producers. SubZero combines innovation and quality, with the determination to help you get the sound you want. From studio and guitars, to powerful PA systems and home audio setups - SubZero is all about cutting-edge audio.